ALARIS GH SN:135216256 syringe infusion pump (TCM)

ALARIS GH SN: 135216256 syringe infusion pump

Year of production: 2014

The Alaris® GH pump is a multi-function syringe pump with variable pressure,

used in critical care, it works with BD Plastipak's wide range of standard disposable syringes.

It fits syringes with capacities from 5 to 50 ml.

Important parameters:

- Bolus Parameters - Maximum bolus infusion rates can be part of the setup. The bolus administration speeds are set in steps, the setting step is 10 ml/h.

– 10 ml/h - 150ml/h 5 ml syringe

– 10 ml/h - 300 ml/h 10 ml syringe

– 10 ml/h - 600ml/h 20 ml syringe

– 10 ml/h - 900 ml/h 30 ml syringe

– 10 ml/h - 1200 ml/h 50 ml syringe

- Sprue parameters - The maximum infusion speed can be part of the configuration.

0.1 ml/h - 150 ml/h 5 ml syringe

0.1 ml/h - 300 ml/h 10 ml syringe

0.1 ml/h - 600ml/h 20 ml syringe

0.1 ml/h - 900ml/h 30 ml syringe

0.1ml/h - 1200ml/h 50ml syringe

The volume range given is 0.0 ml - 9990 ml.

– Data storage in memory: The electronic memory of the pump disconnected from the power source stores data for a period of more than 6 months.

– Electrical safety: Complies with IEC/EN60601-1 and IEC/EN60601-2-24

– Errors signaled: Drive disconnected, occlusion, check syringe, low battery/battery depleted, infusion end approaching alarm, VTBI administered, 220V power missing, internal systems malfunction, attention (nurse call), no pressure sensor, velocity change unconfirmed, in-line occlusion, infusion end

– Battery: Sealed NiMH battery. It is charged automatically when the pump is connected to an AC power source

Comments:

– Device condition: used, photo of the unit

– The device does not have a flow sensor as standard, which is available as an optional option.

– Warranty period – 3 months